Capresso CoffeeTEC 471 Instructions d'exploitation télécharger pdf (Page 14)

14

10. Place a large mug (at least 12 oz.)

underneath the frothing sleeve.

11. Turn the steam selector to the

“Steam On” position.

12. Now turn the machine on by

pushing the on button

(see fig. 2; P).

13. The solution in the water tank will

be pumped into the carafe.

14. After one minute, turn machine off

and let it sit for 5 minutes.

15. Turn the machine on again and let

the rest of the water run through

the system into the carafe.

16. Attention: As soon as the brewing

is finished the frothXpress System

will start drawing water into the

system and then deliver hot steam

and water into the mug.

17. Let the frothXpress System run for

30 seconds. Then turn machine off

for 1 minute and let the solution work.

18. Turn the machine on again and let

the rest of the steam/water process

continue.

19. When there is no more water in

the milk container, turn the steam

selector back to “Steam Off” and

turn the machine off and let it cool

down for five minutes.

20. Empty the stainless steel carafe

and the water container and rinse

both thoroughly with fresh water.

21. Fill the water tank with 8 to 10

cups and the milk container with 10

oz. of fresh, cold water and repeat

steps 11-19.

8.2 Using Other Decalcifying

Agents

Please make sure only to use liquid

decalcifying agents suitable for drip

coffee makers and follow the instruc-

tions that come with the agent.

Attention: Decalcifying agents are

acids and therefore must be handled

properly. Please check the information

on the packaging of the decalcifying

agents before using.

8.3 Decalcifying Hose

In case the steam system is

completely clogged with calcium

deposits, proceed as follows:

1. Unscrew the steam nozzle and

replace with the decalcifying hose

(see fig. 14).

2. Fill the water container up to the 5-

cup marking with fresh cold water.

3. Replace the water container into

the coffee maker.

4. Add one cup of Durgol, so that the

solution is at the 6-cup marking on

the water container.

Attention: Never fill Durgol into the

water container first.

5. Remove the GoldTone filter.

6. Make sure that the filter holder is in

place and that the carafe is empty.

7. Place the carafe on the platform.

8. Fill a large mug with 5 to 6 oz. of

cold water and place underneath

the decalcifying hose so that the tip

of the hose is submerged in the

water (see fig. 14).

9. Turn the machine on.

10. The solution in the water tank

will be pumped into the carafe.

When the brewing is finished the

machine will switch to standby

mode for frothing (the green “Steam

Ready” light will turn on).

12. Turn the steam selector to the

position “Steam On” and let steam

run into the mug containing cold

water. Attention: This will make a

loud noise.

13. Stop after approx. 30 seconds

and wait for 30 seconds. Then

repeat this step five to ten times.

14. Empty the carafe and rinse

thoroughly with fresh water.

15. Run a complete cycle with fresh

water through the machine and the

frother.

1 2 ... 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire