Capresso IMPRESSA C5 Manuel de service télécharger pdf (Page 24)

4 Preparing drinks at the touch of a button

Precondition: your IMPRESSA is ready to use, the Easy Cappuccino

Frother is mounted.

l Take the milk pipe out of the Welcome Pack.

l Take the protective cap off the Easy Cappuccino Frother.

l Attach the milk pipe to the frother.

l Insert the other end in a milk Tetrapack or connect it to a

milk container.

l Place a cup under the Easy Cappuccino Frother.

ä l Turn the Rotary Switch so that it points to the Steam

symbol

m l Press the Rotary Switch to confirm your choice.

The Steam symbol

k will continue flashing until the

IMPRESSA has warmed up. As soon as the required temper-

ature has been reached, the light segment by the switch will

flash.

r l Turn the switch in the anticlockwise direction.

The milk foam will be prepared.

t l Turn the switch in the clockwise direction when there is

sufficient milk foam in the cup.

o As long as the light segment continues to flash by the switch,

you can continue preparing milk foam.

To ensure that the Easy Cappuccino Frother works perfectly, you

should clean it daily. Further information can be found in Chapter 6,

‘Maintenance

– cleaning the Easy Cappuccino Frother’.

To obtain a perfect water flow, attach the removable hot water

nozzle.

There is a danger of scalding from hot water splashes.

l Avoid direct contact with the skin.

Start by replacing the nozzle:

l Carefully remove the Easy Cappuccino Frother from the

Connector System

Milk foam

Hot water

CAUTION

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

Pas de commentaire

Capresso IMPRESSA C5 Manuel de service Page 24